STIHL KM 110 R Manuál s instrukcemi stáhnout pdf (Strana 21)

KM 110 R

English

Checking the Spark Plug

N Clean dirty spark plug.

N Check electrode gap (A) and

readjust if necessary – see

"Specifications".

N Use only resistor type spark plugs of

the approved range.

Rectify problems which have caused

fouling of spark plug:

– Too much oil in fuel mix.

– Dirty air filter.

– Unfavorable running conditions,

e.g. operating at part load.

WARNING

To reduce the risk of fire and burn injury,

use only spark plugs authorized by

STIHL. Always press spark plug boot (1)

snugly onto spark plug terminal (2) of the

proper size. (Note: If terminal has

detachable SAE adapter nut, it must be

attached.) A loose connection between

spark plug boot and ignition wire

connector in the boot may create arcing

that could ignite combustible fumes and

cause a fire.

Installing the spark plug

N Screw the spark plug (3) into the

cylinder and fit the boot (2) (press it

down firmly).

000BA039 KN

002BA363 KN

002BA178 KN

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 75 76

Žádné komentáře

STIHL KM 110 R Manuál s instrukcemi Strana 21